Int 31 Fn 0007  P - DPMI 0.9+ - Set Segment Base Address                   [E]

   AX = 0007h
   BX = selector
   CX:DX = linear base address

Return: CF clear if successful
   CF set on error
       AX = error code (DPMI 1.0+) (8022h,8025h) (see AX=0000h)

Notes: only modify descriptors allocated with INT 31/AX=0000h
   only the low 24 bits of the address will be used by 16-bit DPMI
     implementations even on a 386 or higher
   DPMI 1.0+ automatically reloads any segment registers containing the
     selector being modified
   not supported by MS Windows 3.0 in Standard mode

See Also: AX=0006h,AX=0008h,AX=0009h,AX=000Ch,INT 21/AX=3503h

See Also: INT 21/AH=E9h"OS/286",INT 2C/AX=0002h